- Home
- /
- JOHN GUEST VALVES, TUBES…
White Polypropylene Fittings
The PPM Range of metric size push-fit fittings are produced in white polypropylene and fitted with EPDM seals.
Polypropylene Shut Off Valve
The PP Range of shut-off valves are produced in polypropylene and fitted with EPDM seals. Polypropylene has the advantage of being more chemically resistant than acetal. The valves are for use with potable water. For use with other potable liquids please refer to our Customer Services Department for guidance. The valves are not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
LLDPE Tubing
The John Guest PE Range of plastic tubing is produced in Linear Low Density Polyethylene for cold and intermittent hot water applications. Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non-contaminating materials. Common applications being water purification, water conditioners, icemakers and misting systems. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water.
Suitable for domestic water to commercial systems, we offer a wide range of solutions ideal for softening, conditioning, filtering, reverse osmosis, cleaning, sanitizing, and more.
Benefits
- Instant push-fit connection and leak tight seal
- Connect, disconnect and reconnect in seconds without tools
- No scale build up improves performance and equipment lifespan
- Non-toxic food grade material
- Superior flow characteristics
- Suitable for soft metal or plastic tubes
Grey Acetal Fittings
PI fittings offered in sizes 5/32” to 5/8” are manufactured in grey acetal copolymer, making them especially suitable for applications involving foodstuffs and potable liquids. They are however equally suitable for air and inert gases and can be used on N2/CO2 (installed in accordance with The British Beer and Pub Association Code of Practice) mixed gas dispense lines and in pneumatic applications and vacuum.
White Acetal Fittings
CI inch size fittings are manufactured in white acetal. With a food grade EPDM O-Ring, they have been developed for the water industry but are equally suitable for other potable liquids. They are also recommended for intermittent hot water applications.
Polypropylene Fittings
The PP Range of inch size push-in fittings is produced in white polypropylene and fitted with EPDM seals. Polypropylene has the advantage of being more chemically resistant than acetal.
